About Asphalt Paving
Paving Contractor Atlanta, GA
At Buckhead Paving (678) 540-2345, our aim is to serve our clientele in the most efficient way with the best work possible. Your money cannot be wasted or misused in trying economic times.
Asphalt Paving Contractors
Asphalt is our strong suit. As asphalt paving contractors, we specialize in all asphalt projects, particularly driveways and parking lots. Our team knows the ins and outs because of the years of experience working within this field.
Concrete Paving Contractors
Concrete is also a Buckhead specialty. We are extremely familiar with concrete and work with it on a regular basis. As concrete paving contractors, we often use concrete to install driveways, sidewalks, patios, pool decks, sports courts, parking areas, commercial walkways, and amid industrial areas. Concrete is lasting and can be colored, stained, and stamped for adding to your decorative design.
Paving Services Provided Atlanta
Being Atlanta’s paving contractor of choice we provide a number of paving services and a variety of paving projects. This means we have the ability to repair existing surfaces, as well as the means to replace them. We are able to communicate with our customers and make sure they are satisfied with any asphalt or concrete project they choose.
Some paving services/projects we provide include:
- Striping Pavement/Parking Lots
- Pothole Repair
- Sealing Pavement
- Pavement Replacement/Overlays
- New Pavement Pouring/Finishing
- Concrete & Asphalt Maintenance
- Drainage Repair/Grading
- New Driveways
- Driveway Replacements
- Parking Lots
- Pavement Overlays
- Walkways/Commercial Areas
- Pool Decks
- Drainage Flumes
Please give us a quick call today, for your free estimate.
Asphalt paving is one of the most commonly used forms of construction today. This is due to its high adaptability and low cost. In addition, it is also considered to be a very practical option when it comes to home paving. However, it does have certain shortcomings that need to be taken note of. Read on to know about some of these and consider whether you should opt for asphalt or not.
One of the disadvantages of using an asphalt driveway is that it can be quite slippery. You need to make sure, therefore, that you drive your car carefully on it. And even if you do so, there is still a chance of your vehicle getting stuck on the asphalt. So, you should keep a good grip on the steering wheel and use all the available help you can. This is especially important if you are making a long distance drive.
There is also a possibility that asphalt might damage the surface underneath if it is not properly sealed. This is because asphalt is a petroleum product and petroleum products can cause damage to the environment. Therefore, you should make sure that the paved area is adequately sealed to make sure that it does not erode.
It is also important to remember that asphalt can crack when it gets too wet. If this happens, you will need to replace the area with new asphalt so that it does not get cracked again in future. Otherwise, you may end up spending more on repairing cracks that you have caused. In fact, asphalt cracks can be a real headache especially during heavy rains when the paver becomes very susceptible to water penetration.
Apart from this, asphalt is also susceptible to cracking when it is exposed to heat. This is especially true during summer months when the temperature is high. During this period, it is possible for the asphalt to get very soft and mushy. When this happens, it is much harder to seal the surface properly and repair any cracks that have developed.
Another problem that can occur with an asphalt paver is when it is being used improperly. For instance, when the asphalt paver is being used to pave driveways, it can easily grind over the edges of the driveway. The grout lines might also get damaged during this process. In fact, there are some homeowners who prefer using concrete or paved paths in front of their homes and driveways. However, they often forget that they should also seal these paths. Sealing the pathways will help to keep them protected from debris, grit, water and sand.
Homeowners should therefore find a qualified company to clean up their asphalt paver once in a while. These professionals will use a pressure washer to remove all the dirt and debris that have built up on the paver. They will then use a power washer to completely clean the water surface. After this is done, you can simply have the surfaces sealed and maintained by your local company.
By hiring a company to perform regular maintenance on your asphalt paver, you will be able to prevent some very common problems. For instance, if you find that the pavers have cracks, you can ask your local maintenance company to repair these cracks before they become larger. You can also ask them to apply new asphalt once a year. If you forget to do this, the asphalt will eventually wear out and begin to crack again. By properly maintaining your asphalt paver, you will be able to save yourself money in the long run because you will not have to call maintenance on a regular basis.
About Tucker, Georgia
The 1821 Georgia Land Lottery opened portions of state land for settlement between the Flint and Ocmulgee rivers, including present-day DeKalb County. The Muscogee (Creek) Nation ceded the land to the United States in January of that year, and drawings for lots measuring 202.5 acres (81.9 ha) each began in May in Milledgeville, the state capital until 1868. The land grant fee was $19.00.
In 1821, the area that would become Tucker was in Militia District 572 in Henry County. The state created DeKalb County on December 9, 1822, and District 572 became DeKalb's 18th District, or the Brownings District, reportedly named for Andrew Browning.
Among the thirty cemeteries within a 4-mile (6 km) radius of Main Street, approximately 30 graves belong to individuals born in the 18th century, four of whom are Revolutionary War soldiers. Twelve graves belong to Confederate soldiers.
In spite of DeKalb County delegates voting against secession from the United States, Georgia joined the Confederacy and seceded from the Union in 1861. The full reality of that decision marched into Tucker in July 1864. Union soldiers camped at Henderson's Mill, used the Brownings Court, one of the few buildings in the area they did not burn, dismantled the railroad to Stone Mountain, and formed the left wing of Sherman's advance to Atlanta.
In 1886 the Georgia, Carolina and Northern Railway received a charter to build a new rail line between Monroe, North Carolina, and Atlanta. Prior to the project's completion, the company leased the road to the Seaboard Air Line Railroad system, a collection of regional railroads headquartered in North Carolina eager to extend its reach to Atlanta.
Seaboard built depots at a number of small villages, often little more than a crossroads, and named them for railroad company officials. The depot at Jug Tavern, for example, was named for Seaboard's general manager, John H. Winder. The stop at Bryan was named in honor of the system's general superintendent, Lilburn Meyers. Although the origin of the name is unknown, it is possible that the next stop, in the Brownings District, may have been named for Rufus S. Tucker, a director and major shareholder in several Seaboard system railroads. At the DeKalb County Centennial Celebration in 1922, Charles Murphey Candler stated that Tucker a “prosperous and promising village on the Seaboard Air Line Railway . . . was named in honor of Capt. Tucker, an official of the Seaboard Air Railway.” Some residents attribute the name to a local family with the surname Tucker.
The first train steamed into the new Tucker station on Sunday, April 24, 1892. Originating in Elberton with a final destination of the Atlanta suburb of Inman Park — a four-hour trip — the Seaboard train consisted of two cars carrying 150 passengers and a baggage car. Two months later the US Postal Service appointed Alpheus G. Chewning first Postmaster of the Tucker Post office. Rural Free Delivery began on March 2, 1903.
On Saturday, July 1, 1967, the Seaboard Air Line Railroad merged with the Atlantic Coast Line to form Seaboard Coast Line Railroad. In 1983 The line became Seaboard System and merged with the Chesapeake & Ohio, Baltimore & Ohio and the Western Maryland in 1986 Chessie System to form current railroad operator, CSXT.
Although no longer a train stop for passengers, the Tucker depot is currently a CSX field office for track repair and signal maintenance.
Tucker, at 1,117 feet (340 m) feet above sea level, is the highest point of elevation on the railroad line between Atlanta and Richmond, Virginia.
Following World War II, Tucker began a steady transition from an agricultural community to a mixed industrial, retail, and residential area. The strength of a county-wide water system extending into Tucker by the 1950s, and the post war establishment of nearby employers in other areas of the county including the Centers for Disease Control and Prevention in 1947, General Motors in Doraville, Kraft Foods in Decatur, and the growth of Emory University, brought new residents to Tucker from across the nation. Descendants of early settlers subdivided and sold family land for neighborhoods and shopping plazas. Local community leaders opened Tucker Federal Savings and Loan, created a youth football league, and by the 1960s newspapers identified Tucker as “DeKalb’s Area of Golden Opportunity.” The post–World War II baby boom drove the growth of DeKalb County schools and with the affordability of the car, the expansion of the highway system, and inexpensive fuel, Tucker became an ideal location to call home.
Tucker is located in northeastern DeKalb County at(33.851736, -84.221524), approximately 15 miles (24 km) northeast of downtown Atlanta. According to the United States Census Bureau, the CDP has a total area of 12.1 square miles (31 km), of which 12.0 square miles (31 km2) is land and 0.1 square miles (0.26 km), or 0.83%, is water.
The Eastern Continental Divide cuts through Tucker, along Chamblee-Tucker Road to LaVista Road and continuing south towards Mountain Industrial Boulevard. Water falling to the west of this line flows towards the Chattahoochee River and the Gulf of Mexico. Water falling to the east of this line flows towards the Atlantic Ocean through the Ocmulgee River.
Tucker is in the state's Piedmont geologic region, composed of igneous and metamorphic rocks resulting from 300 to 600 million year old sediments that were subjected to high temperatures and pressures and re-exposed roughly 250 to 300 million years ago. Rocks typical of the region include schist, amphibolite, gneiss, migmatite, and granite.
Over a dozen creeks originate in Tucker including Burnt Fork Creek, South Fork Peachtree Creek, Camp Creek, and Henderson Mill Creek. Prior to the widespread accessibility of electricity and indoor plumbing, several were used as mill ponds or dammed for baptism. From 1906 until its demise in the 1940s, Burnt Fort Creek was the primary tributary for the Decatur Waterworks.
Tucker's climate, typical of a humid subtropical climate, features mild winters and hot summers. In spite of moderate conditions compared to communities in many other states, Tucker has occasional extreme weather. The record high is 110 °F (43 °C), recorded on July 8, 1927, and the record low, January 21, 1985, −10 °F (−23 °C).
As of the 2020 United States census, there were 37,005 people, 14,479 households, and 8,753 families residing in the city.
According to the 2010 census, the Tucker Census-designated place (CDP) had a population of 27,581, and the racial and ethnic composition of the CDP was as follows:
As of 2012, the median income per household was $64,388, and the per capita income was $33,552. 11.4% of the population is below the poverty line, 5.6% lower that the state average.
Of the 11,894 housing units identified in 2012, the home ownership rate is 70.7% and the median value of owner occupied housing units, $233,700. Multi-unit structures (apartment complexes, condominiums) represent 22% of all housing.