About Asphalt Paving
Paving Contractor Atlanta, GA
At Buckhead Paving (678) 540-2345, our aim is to serve our clientele in the most efficient way with the best work possible. Your money cannot be wasted or misused in trying economic times.
Asphalt Paving Contractors
Asphalt is our strong suit. As asphalt paving contractors, we specialize in all asphalt projects, particularly driveways and parking lots. Our team knows the ins and outs because of the years of experience working within this field.
Concrete Paving Contractors
Concrete is also a Buckhead specialty. We are extremely familiar with concrete and work with it on a regular basis. As concrete paving contractors, we often use concrete to install driveways, sidewalks, patios, pool decks, sports courts, parking areas, commercial walkways, and amid industrial areas. Concrete is lasting and can be colored, stained, and stamped for adding to your decorative design.
Paving Services Provided Atlanta
Being Atlanta’s paving contractor of choice we provide a number of paving services and a variety of paving projects. This means we have the ability to repair existing surfaces, as well as the means to replace them. We are able to communicate with our customers and make sure they are satisfied with any asphalt or concrete project they choose.
Some paving services/projects we provide include:
- Striping Pavement/Parking Lots
- Pothole Repair
- Sealing Pavement
- Pavement Replacement/Overlays
- New Pavement Pouring/Finishing
- Concrete & Asphalt Maintenance
- Drainage Repair/Grading
- New Driveways
- Driveway Replacements
- Parking Lots
- Pavement Overlays
- Walkways/Commercial Areas
- Pool Decks
- Drainage Flumes
Please give us a quick call today, for your free estimate.
Asphalt paving is one of the most commonly used forms of construction today. This is due to its high adaptability and low cost. In addition, it is also considered to be a very practical option when it comes to home paving. However, it does have certain shortcomings that need to be taken note of. Read on to know about some of these and consider whether you should opt for asphalt or not.
One of the disadvantages of using an asphalt driveway is that it can be quite slippery. You need to make sure, therefore, that you drive your car carefully on it. And even if you do so, there is still a chance of your vehicle getting stuck on the asphalt. So, you should keep a good grip on the steering wheel and use all the available help you can. This is especially important if you are making a long distance drive.
There is also a possibility that asphalt might damage the surface underneath if it is not properly sealed. This is because asphalt is a petroleum product and petroleum products can cause damage to the environment. Therefore, you should make sure that the paved area is adequately sealed to make sure that it does not erode.
It is also important to remember that asphalt can crack when it gets too wet. If this happens, you will need to replace the area with new asphalt so that it does not get cracked again in future. Otherwise, you may end up spending more on repairing cracks that you have caused. In fact, asphalt cracks can be a real headache especially during heavy rains when the paver becomes very susceptible to water penetration.
Apart from this, asphalt is also susceptible to cracking when it is exposed to heat. This is especially true during summer months when the temperature is high. During this period, it is possible for the asphalt to get very soft and mushy. When this happens, it is much harder to seal the surface properly and repair any cracks that have developed.
Another problem that can occur with an asphalt paver is when it is being used improperly. For instance, when the asphalt paver is being used to pave driveways, it can easily grind over the edges of the driveway. The grout lines might also get damaged during this process. In fact, there are some homeowners who prefer using concrete or paved paths in front of their homes and driveways. However, they often forget that they should also seal these paths. Sealing the pathways will help to keep them protected from debris, grit, water and sand.
Homeowners should therefore find a qualified company to clean up their asphalt paver once in a while. These professionals will use a pressure washer to remove all the dirt and debris that have built up on the paver. They will then use a power washer to completely clean the water surface. After this is done, you can simply have the surfaces sealed and maintained by your local company.
By hiring a company to perform regular maintenance on your asphalt paver, you will be able to prevent some very common problems. For instance, if you find that the pavers have cracks, you can ask your local maintenance company to repair these cracks before they become larger. You can also ask them to apply new asphalt once a year. If you forget to do this, the asphalt will eventually wear out and begin to crack again. By properly maintaining your asphalt paver, you will be able to save yourself money in the long run because you will not have to call maintenance on a regular basis.
About Holly Springs, Georgia
The Georgia General Assembly incorporated the place in 1906 as the Town of Holly Springs. According to tradition, the city was named from a stand of holly trees near a spring at the original town site.
Holly Springs is located south of the center of Cherokee County at(34.166478, -84.501016). It is bordered by Canton, the county seat, to the north, and by Woodstock to the south. Interstate 575 passes through the city, with access from exits 11 and 14. Downtown Atlanta is 36 miles (58 km) to the south.
According to the United States Census Bureau, Holly Springs has a total area of 6.7 square miles (17.3 km), of which 6.6 square miles (17.0 km2) is land and 0.12 square miles (0.3 km), or 1.57%, is water.
As of the 2020 United States census, there were 16,213 people, 4,145 households, and 3,205 families residing in the city.
As of the census of 2000, there were 3,195 people, 1,136 households, and 892 families residing in the city. The population density was 1,008.5 inhabitants per square mile (389.4/km2). There were 1,173 housing units at an average density of 370.3 per square mile (143.0/km). The racial makeup of the city was 94.80% White, 1.16% African American, 0.66% Native American, 0.75% Asian, 0.03% Pacific Islander, 1.44% from other races, and 1.16% from two or more races. Hispanic or Latino of any race were 4.82% of the population.
There were 1,136 households, out of which 45.6% had children under the age of 18 living with them, 66.9% were married couples living together, 7.7% had a female householder with no husband present, and 21.4% were non-families. 16.3% of all households were made up of individuals, and 3.3% had someone living alone who was 65 years of age or older. The average household size was 2.81 and the average family size was 2.16.
In the city, the population was spread out, with 30.1% under the age of 18, 7.3% from 18 to 24, 40.8% from 25 to 44, 16.7% from 45 to 64, and 5.0% who were 65 years of age or older. The median age was 31 years. For every 100 females, there were 103.1 males. For every 100 females age 18 and over, there were 111.2 males.
The median income for a household in the city was $57,019, and the median income for a family was $61,651. Males had a median income of $40,717 versus $26,823 for females. The per capita income for the city was $22,992. About 0.8% of families and 1.3% of the population were below the poverty line, including 1.6% of those under age 18 and none of those age 65 or over.